|
1. Single application wraps everything for GPS Simulation!
2. COM Port Configuration for data communication!
3. TCP/IP configurations are supported!
4. Separate simulation for sending and receiving GPS or Raw data!
5. Data sending in a loop for selected period of time!
6. Simulation on TCP/IP!
7. One Server to Many Connected Client Architecture for GPS simulation!
8. HyperTerminal Behavior for sending/receiving data in NMEA Mode!
9. Editable COM Port Configuration!
10. Received NMEA Sentence parsed values Display!
11. Supports Five Modes of GPS Simulation:
(a) NMEA – EARTH Mode
(b) NMEA – MAP Mode
(c) None Mode
(d) Manual Mode
(e) Forwarded Input Mode
12.
Tro GPS Simulator GOLS supports Log Files Play Back in which
user can playback generated log files by it.
13. In NMEA – EARTH Mode, user can generate and simulate the NMEA sentences by selecting the longitude and latitude coordinates on 3D moving earth!
14. In NMEA – MAP Mode, user can generate and simulate the NMEA sentences by selecting the longitude and latitude coordinates on world map!
15. In NMEA – None Mode, user can simulate the raw data or by writing NMEA sentences manually!
16. In Manual Mode, user can generate and simulate the NMEA sentences by selecting values manually!
17. In Forwarded Input Mode, user can bridge the more than Tro GPS Simulator and other NMEA devices.
18. Tro GPS Simulator supports following NMEA sentences generation:
$GPAAM, $GPGGA, $GPGLL, $GPGSA, $GPGSV, $GPRMC, $GPRTE, $GPVTG, $GPWPL and $ GPZDA
19. Following NMEA sentences can be generated by selecting location on Earth or World Map:
$GPGGA, $GPGLL, $GPRMC and $GPWPL
20. On receiving any NMEA Sentence world map will show the exact position by determining the longitude and latitude from the sentence!
21. GPS Tracer is supported. It shows the straight line drawing for received sentences!
|
|